여러분은 우선 우리 ITExamDump사이트에서 제공하는Juniper인증JN0-696시험덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용전부를 환불해드립니다.
ITExamDump선택으로Juniper JN0-696시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서Juniper JN0-696관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Juniper JN0-696덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.
JN0-696인증시험은Juniper사의 인중시험입니다.Juniper인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이Juniper인증JN0-696시험을 응시합니다.하지만 실질적으로JN0-696시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.
연구결과에 의하면Juniper인증 JN0-696시험은 너무 어려워 시험패스율이 낮다고 합니다. ITExamDump의 Juniper인증 JN0-696덤프와 만나면Juniper인증 JN0-696시험에 두려움을 느끼지 않으셔도 됩니다. ITExamDump의 Juniper인증 JN0-696덤프는 엘리트한 IT전문가들이 실제시험을 연구하여 정리해둔 퍼펙트한 시험대비 공부자료입니다. 저희 덤프만 공부하시면 시간도 절약하고 가격도 친근하며 시험준비로 인한 여러방면의 스트레스를 적게 받아Juniper인증 JN0-696시험패스가 한결 쉬워집니다.
시험 번호/코드: JN0-696
시험 이름: Juniper (Security Support, Professional (JNCSP-SEC))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 36 문항
업데이트: 2014-02-18
만약 아직도Juniper JN0-696시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 ITExamDump에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와Juniper JN0-696인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약Juniper JN0-696인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리ITExamDump선택을 후회하지 않을 것입니다, 우리ITExamDump과의 만남으로 여러분은 한번에 아주 간편하게Juniper JN0-696시험을 패스하실 수 있으며,Juniper JN0-696자격증으로 완벽한 스펙을 쌓으실 수 있습니다,
JN0-696 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-696.html
NO.1 Your SRX Series device has the following configuration:
user@host> show security policies
...
Policy: my-policy, State: enabled, Index: 5, Sequence number: 1
Source addresses: any Destination addresses: any
Applications: snmp
Action: reject
From zone: trust, To zone: untrust
...
When traffic matches my-policy, you want the device to silently drop the traffic; however, you
notice that the device is replying with ICMP unreachable messages instead.
What is causing this behavior?
A. the snmp application
B. the reject action
C. the trust zone
D. the untrust zone
Answer: C
Juniper자료 JN0-696인증 JN0-696 pdf
NO.2 Users at a branch office report that they cannot reach an internal Web server. The users
connect through a single SRX Series device to reach the Web server. A security policy has been
configured on the device that allows traffic to flow between interfaces in the Trust zone.
What is causing this problem?
A. The interface on the device that connects to the Web server is not in the Trust zone.
B. The IPsec VPN connection between the users and the Web server is down.
C. There is a host inbound traffic configuration problem.
D. There is an antispam configuration problem.
Answer: C
Juniper기출문제 JN0-696 JN0-696 JN0-696 pdf
NO.3 You are having problems establishing an IPsec tunnel between two SRX Series devices.
What are two explanations for this problem? (Choose two.)
A. proposal mismatch
B. antivirus configuration
C. preshared key mismatch
D. TCP MSS clamping is disabled
Answer: B,D
Juniper자격증 JN0-696 JN0-696
NO.4 Two SRX Series devices are having problems establishing an IPsec VPN session. One of the
devices has a firewall filter applied to its gateway interface that rejects UDP traffic.
What would resolve the problem?
A. Disable the IKE Phase 1 part of the session establishment.
B. Disable the IKE Phase 2 part of the session establishment.
C. Change the configuration so that session establishment uses TCP .
D. Edit the firewall filter to allow UDP port 500.
Answer: A
Juniper pdf JN0-696시험문제 JN0-696기출문제 JN0-696 JN0-696
NO.5 You notice that the secondary node of a chassis cluster has become disabled.
What caused this behavior?
A. The fxp0 interface on the secondary device failed.
B. The control link between the devices failed.
C. A reth on the secondary device failed.
D. An IPsec tunnel between the two devices failed.
Answer: D
Juniper인증 JN0-696 JN0-696
NO.6 You want to allow remote users using PCs running Windows 7 to access the network using an
IPsec VPN. You implement a route-based hub-and-spoke VPN; however, users report that they are
not able to access the network.
What is causing this problem?
A. The remote clients do not have proper licensing.
B. Hub-and-spoke VPNs cannot be route-based; they must be policy-based.
C. The remote clients' OS is not supported.
D. Hub-and-spoke VPNs do not support remote client access; a dynamic VPN must be implemented
instead.
Answer: B
Juniper JN0-696 JN0-696덤프 JN0-696
ITexamdump의 HP2-N44덤프의 VCE테스트프로그램과 1Z0-027덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-341시험에 대비한 고품질 덤프와 70-466시험 최신버전덤프를 제공해드립니다. 최고품질 700-101시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기