2014년 2월 25일 화요일

Dell DC0-200 인증 덤프

ITExamDump는 여러분의 시간을 절약해드릴 뿐만 아니라 여러분들이 안심하고 응시하여 순조로이 패스할수 있도록 도와주는 사이트입니다. ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려 져있습니다. 그리고 여러분에 신뢰를 드리기 위하여Dell DC0-200관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. 우리는ITExamDump제품에 대하여 아주 자신이 있습니다. 우리Dell DC0-200도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다. ITExamDump선택은 틀림없을 것이며 여러분의 만족할만한 제품만을 제공할것입니다.

Dell인증 DC0-200시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 Dell인증 DC0-200덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. Dell 인증DC0-200시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Dell 인증DC0-200시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.

시험 번호/코드: DC0-200
시험 이름: Dell (Certified Server Professional Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-02-24

ITExamDump를 선택함으로, ITExamDump는 여러분Dell인증DC0-200시험을 패스할 수 있도록 보장하고,만약 시험실패시 ITExamDump에서는 덤프비용전액환불을 약속합니다.

ITExamDump의 Dell인증 DC0-200시험덤프자료는 여러분의 시간,돈 ,정력을 아껴드립니다. 몇개월을 거쳐 시험준비공부를 해야만 패스가능한 시험을ITExamDump의 Dell인증 DC0-200덤프는 며칠간에도 같은 시험패스 결과를 안겨드릴수 있습니다. Dell인증 DC0-200시험을 통과하여 자격증을 취득하려면ITExamDump의 Dell인증 DC0-200덤프로 시험준비공부를 하세요.

ITExamDump의 인지도는 고객님께서 상상하는것보다 훨씬 높습니다.많은 분들이ITExamDump의 덤프공부가이드로 IT자격증 취득의 꿈을 이루었습니다. ITExamDump에서 출시한 Dell인증 DC0-200덤프는 IT인사들이 자격증 취득의 험난한 길에서 없어서는 안될중요한 존재입니다. ITExamDump의 Dell인증 DC0-200덤프를 한번 믿고 가보세요.시험불합격시 덤프비용은 환불해드리니 밑져봐야 본전 아니겠습니까?

DC0-200 덤프무료샘플다운로드하기: http://www.itexamdump.com/DC0-200.html

NO.1 Which two features are found on both 24U and 42U Dell racks? (Choose two.)
A. split rear door for cable access
B. diagnostic LCD panel on the front door
C. integrated redundant 1000 watt power supplies
D. 0U space that can be used for components other than servers and storage
Answer: AD

Dell   DC0-200   DC0-200 dump

NO.2 What is the correct NIC teaming for the Intel Proprietary Method to accomplish fault tolerance?
A. AFT
B. ALB
C. ATF
D. SLB
Answer: A

Dell dumps   DC0-200자격증   DC0-200인증

NO.3 Which two components can be installed in the 0U space found in Dell racks? (Choose two .)
A. Dell UPS
B. Dell PDU
C. Dell flat panel monitor
D. Dell Dual-Power Grid Switch
Answer: BD

Dell   DC0-200 dump   DC0-200   DC0-200   DC0-200

NO.4 Which four steps are necessary for creating a team in Windows 2000 using BASP? (Choose four.)
A. set the media type for the adapters
B. create a team and assign it a name
C. select the adapters from the list to add to the team
D. select the Broadcom Advanced Server Program Driver
E. configure the IP address and subnet mask for the team F. enter the path and filename of the
configuration to be saved
Answer: BCDE

Dell   DC0-200 dump   DC0-200   DC0-200덤프

NO.5 You are about to begin the installation of Windows 2000 Server on your PowerEdge server . As you
inspect the System Setup Utility, you notice that the Asset Tag field is blank. What are two ways you can
add the correct asset tag into the BIOS? (Choose two.)
A. Flashing the ESM to the latest revision automatically updates the Asset Tag field.
B. Flashing the BIOS to the latest revision automatically updates the Asset Tag field.
C. You create the Asset Tag Utility Diskette from the DSA CD and use it to update the Asset Tag field.
D. You download the Asset Tag Utility from premiersupport.dell.com and use it to update the Asset Tag
Field.
E. After installing Windows 2000, you use the Asset Manager application from the Dell group in control
panel to update the Asset Tag field.
Answer: CD

Dell pdf   DC0-200자료   DC0-200 dumps   DC0-200   DC0-200

NO.6 Which three statements are true about installing the Intel drivers and utilities that allow teaming in
Windows 2000? (Choose three .)
A. You must install the ProSet Utility.
B. You must install the Intel driver using floppy diskettes.
C. Loading Windows 2000 using the DSA CD-ROM loads the drivers and ProSet Utility.
D. If you install the adapters after you have installed the OS, you can get the drivers from the Intel
Network Drivers CD.
E. If you install the adapters after you have installed the OS, you can get the ProSet Utility from the Intel
ProSet Utility CD.
Answer: ACD

Dell   DC0-200   DC0-200덤프   DC0-200

NO.7 What is the default path and name of the logging file if the Message Logging option is selected when
running diagnostics?
A. A: RESULT.txt
B. C: RESULTS.txt
C. C: DELLTEST.txt
D. A: DELLTESTS.txt
Answer: A

Dell   DC0-200기출문제   DC0-200 dump

NO.8 What happens when you specify a Preferred Primary Adapter in Windows 2000 for an AFT NIC team?
A. You specify which adaptor will take the entire load. The other NICs will be used only when the
Preferred Primary fails.
B. You specify the desired card for all outgoing traffic for the team. The other members will still accept
incoming packets.
C. You specify the desired card for all incoming traffic for the team. The other members will still transmit
outgoing packets.
D. You specify which adaptor will take the load until it is saturated, then the other members will start
accepting packets until the Preferred Primary is just below the saturation point.
Answer: A

Dell   DC0-200   DC0-200   DC0-200인증

NO.9 Which benefit does Link Aggregation provide, as used by Intel NICs in PowerEdge servers?
A. provides load-balanced fault tolerance to the network
B. assures that if one adapter fails, the server remains available to the network
C. combines multiple adapters into one channel, providing greater bandwidth for network traffic
D. allows multiple adapters to share the network load, preventing one adapter from being overloaded
Answer: C

Dell   DC0-200자격증   DC0-200최신덤프   DC0-200

NO.10 You need to install Intel NIC teaming for Windows 2000 and you do not have access to the Internet.
From what two sources can you obtain the PROSet software? (Choose two.)
A. Intel Network Drivers CD
B. Dell Server Assistant (DSA)
C. Dell Network Applications CD
D. Windows 2000 Installation CD
Answer: AB

Dell   DC0-200자료   DC0-200

NO.11 How many PowerEdge 1650 servers can be installed in a Dell 42U rack that already has two
PowerEdge 2650 servers, a PowerEdge 6650 server, and a 1U keyboard and monitor drawer?
A. 31
B. 32
C. 33
D. 34
Answer: C

Dell자격증   DC0-200   DC0-200   DC0-200   DC0-200덤프

NO.12 You have just installed W2K on your server and you cannot get the server to see your local network.
What can you do to diagnose network connectivity? (Choose three.)
A. verify that the server is configured to use DNS
B. verify that the cable plugged into your server is not a cross-over cable
C. verify that the subnet address is the same as the rest of the working devices on your LAN
D. verify that if attached to a switch and using VLANs, your port is in the proper configuration
Answer: BCD

Dell dump   DC0-200   DC0-200 dump

NO.13 Which tool can be used to create a Utility Partition?
A. DOS fdisk Utility
B. Dell Server Assistant CD
C. Dell OpenManage Array Manager
D. Dell OpenManage IT Assistant CD
Answer: B

Dell   DC0-200자료   DC0-200최신덤프   DC0-200   DC0-200기출문제

NO.14 Which statement is true about using the Save feature of BASP?
A. It is only available in Windows 2000.
B. It saves a configuration as an executable file.
C. It lets you transfer teaming configurations to other servers.
D. It is used to install and configure the Broadcom Ethernet Controller driver.
Answer: C

Dell dump   DC0-200기출문제   DC0-200   DC0-200   DC0-200

NO.15 You are configuring network teaming on a PowerEdge server. The server has Windows 2000 installed
and you do not know what network adapters are in the system. Without physically opening the chassis,
what are two ways to see which network adapters are installed using the operating system? (Choose
two.)
A. type ifconfig -a at a command prompt; on the description line, the manufacturer and device type will be
named
B. type ipconfig /all at the command prompt; on the description line, the manufacturer and device type will
be named
C. right-click My Computer, select Manage, left-click Device Manager, expand Network Adapters, and
view installed adapters
D. right-click Network Neighborhood, select Properties, double-click Internet Protocol (TCP/IP), and view
protocol-bound adapters
Answer: BC

Dell자료   DC0-200   DC0-200

NO.16 Which three hard drive partitions must be defined during the automated Linux installation process?
(Choose three.)
A. root
B. logs
C. boot
D. data
E. swap
Answer: ACE

Dell시험문제   DC0-200   DC0-200   DC0-200

NO.17 What is the intended mounting location for a 0U rack mount device in a Dell rack?
A. at the top of the rack
B. on the back doors of the rack
C. in any of the 42U spaces available
D. in the mounting holes in the side walls of the rack
Answer: D

Dell덤프   DC0-200   DC0-200   DC0-200

NO.18 Which two operations can be performed with the DSA CD? (Choose two.)
A. run system diagnostics on your server
B. create Windows 2000 driver/utilities diskette(s)
C. create NetWare 5.1/6.0 driver/utilities diskette(s)
D. change the Dell Service Tag via the Service Tag Utility
Answer: BC

Dell   DC0-200   DC0-200

NO.19 You select the RAID Configuration Utility from the Utility Partition menu. This takes you to the _____.
A. system setup
B. PERC BIOS
C. CERC BIOS
D. Array Manager
Answer: B

Dell기출문제   DC0-200 dumps   DC0-200   DC0-200자료   DC0-200 dumps

NO.20 You want to install Windows 2000 Server and Dell-validated drivers for your factory-installed devices
using the Dell Server Assistant CD. From which location should you launch the Dell Server Assistant?
A. boot to the Dell Server Assistant CD after installing Windows 2000
B. autorun the CD from the Windows desktop after installing Windows 2000
C. boot to the Dell Server Assistant CD and have your Windows CD available
D. use the Dell Server Assistant to create a Utility Partition and launch the installation from the Utility
Partition
Answer: C

Dell   DC0-200 pdf   DC0-200   DC0-200인증

ITexamdump의 00M-624덤프의 VCE테스트프로그램과 VCP510PSE덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-696시험에 대비한 고품질 덤프와 HP2-B100시험 최신버전덤프를 제공해드립니다. 최고품질 70-481시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/DC0-200.html

댓글 없음:

댓글 쓰기