ITExamDump덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. ITExamDump제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. ITExamDump의Oracle인증 1z1-485덤프는 이해하기 쉽고 모든Oracle인증 1z1-485시험유형이 모두 포함되어 있어 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.
목표가 있다면 목표를 향해 끊임없이 달려야 멋진 인생이 됩니다. 지금의 현황에 만족하여 아무런 노력도 하지 않는다면 언젠가는 치열한 경쟁을 이겨내지 못하게 될것입니다. IT업종에 종사중이시라면 다른분들이 모두 취득하는 자격증쯤은 마련해야 되지 않겠습니까? Oracle인증 1z1-485시험은 요즘 가장 인기있는 자격증 시험의 한과목입니다. IT업계에서 살아남으려면ITExamDump에서Oracle인증 1z1-485덤프를 마련하여 자격증에 도전하여 자기의 자리를 찾아보세요.
인테넷에 검색하면 Oracle 1z1-485시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서ITExamDump의Oracle 1z1-485제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.
현재 경쟁울이 심한IT시대에,Oracle 1z1-485자격증 취득만으로 이 경쟁이 심한 사회에서 자신만의위치를 보장할수 있고 더욱이는 한층업된 삶을 누릴수 있을수도 있습니다. 우리ITExamDump 에서 여러분은Oracle 1z1-485관련 학습지도서를 얻을 수 있습니다. 우리ITExamDump는 IT업계엘리트 한 강사들이 퍼펙트한Oracle 1z1-485문제집을 만들어서 제공합니다. 우리가 제공하는Oracle 1z1-485문제와 답으로 여러분은 한번에 성공적으로 시험을 패스 하실수 있습니다. 중요한것 저희 문제집을 선택함으로 여러분의 시간도 절약해드리고 무엇보다도 많은 근심없이 심플하게 시험을 패스하여 좋다는 점입니다.
ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 Oracle인증1z1-485시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 Oracle인증1z1-485덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
시험 번호/코드: 1z1-485
시험 이름: Oracle (Exadata Database Machine Models X3-2 and X3-8 Implementation Essentials)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 71 문항
업데이트: 2014-04-20
ITExamDump는Oracle 1z1-485인증시험을 아주 쉽게 패스할 수 있도록 도와드리는 사이트입니다. ITExamDump의 엘리트한 전문가가 끈임 없는 노력으로 최고의Oracle 1z1-485자료를 만들었습니다. 이 자료로 여러분은 100%Oracle의1z1-485인증시험을 패스할 수 있으며, ITExamDump을 선택함으로 성공을 선택한 것입니다. ITExamDump가 제공하는 시험가이드로 효과적인 학습으로 많은 분들이 모두 인증시험을 패스하였습니다. 이건 모두 ITExamDump 인증시험덤프로 공부하였기 때문입니다. 그 중Oracle 1z1-485인증시험을 패스한 분들도 모두 ITExamDump인증시험덤프를 사용하였기 때문입니다.
Oracle 1z1-485 시험을 어떻게 통과할수 있을가 고민중이신 분들은ITExamDump를 선택해 주세요. ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의Oracle 1z1-485시험대비 덤프는Oracle 1z1-485시험을 간단하게 패스하도록 힘이 되어드립니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.
1z1-485 덤프무료샘플다운로드하기: http://www.itexamdump.com/1z1-485.html
NO.1 A customer has three databases named CC. FIN, and DW. The CC database is for their
CallCenter. Even a slight decrease in the response time of the database would mean more people
"on hold" in their data center. The orders received through the CallCenter are stored in the Finance
(FIN) database. Both databases, CC and FIN, serve as sources for the Data Warehouse (DW)
database. All databases use the same Automatic Storage Management (ASM) diskgroup and
therefore, the same physical disks on Exadata storage. The customer wants to dynamically control
the resources that are available for the CallCenter database because this has direct impact on their
operations?
Which option should be implemented?
A. DBRM on the CC database
B. DBRM on all the databases
C. IORM, because DBRM cannot be changed for an existing session
D. IORM and DBRM
Answer: B
Oracle 1z1-485최신덤프 1z1-485자격증
Explanation:
Using the Database Resource Manager, you can: Distribute available processing resources by
allocating percentages of CPU time to different users and applications. In a data warehouse, a
higher percentage may be given to ROLAP (relational on-line analytical processing) applications than
to batch jobs.
NO.2 Which two statements are true about enabling write-back flash cache?
A. When enabling write-back flash cache in a non rolling manner, it is important to ensure that
asmdeactivatonoutcome is set to YES and asmModestatus is set to ONLINE for all grid disks.
B. Before using write-back flash cache, you need to verify the minimum required versions.
C. Before write back-flash cache is enabled, you need to drop the Flash Cache first.
D. The setting flashCacheMode should be set to writeback by updating cellinit.ora and restarting
cellsrv.
E. When enabling write-back flash cache in a rolling manner, dcli should be used to inactivate the
grid disks on all cells first.
Answer: B,C
Oracle 1z1-485 1z1-485
Explanation:
B: Exadata storage version 11.2.3.2.1 is the minimum version required to use this write back flash
cache option.
C: Steps for Enabling Write back flash cache:
First of all, you don't need the stop CRS or database (This is ROLLING method) ,you can do it cell
by cell.
*drop flashcache
*Be sure asmdeactivationoutcome is YES is before disabling grid disk
NO.3 Consider the following setup:
User A1 belongs to resource group High on Database A.
User B2 belongs to resource group Low on Database B.
User C3 is a user on Database C without any DBRM setup.
DBRM setup:
Database A: Resource group High gets 80% and Low gets 20%.
Database B: Resource group High gets 60% and Low gets 40%.
IORM setup:
Database A: Share=20, limit=5
Database B: Share=30, limit=10
Database C: 5 shares
Total number of shares in the IORM setup = 100
What percent of I/O will each database user theoretically be using when the Exadata storage unit
I/O throughout is used 100% and no other databases but A, B, and C are running?
A. Al = 36%, B2=18%, and C3=9%
B. Al = 33%, B2=33%, and C3=33%
C. AI = 10%, B2=5%, and C3=20%
D. Al = 8%, B2=12%, and C3=5%
E. Al = 5%, B2=10%, and C3=85%
Answer: E
Oracle 1z1-485 1z1-485 1z1-485 1z1-485 dumps
Explanation:
IORM setup limits Database A to 5%, and Database B is limited to 10%, while
Database C has not IORM limit.
Not that the resource groups are for CPU allocation.
NO.4 Exadata Database Machine offers an Intelligent Platform Management Interface for the
various components in the Exadata product. Which option is true?
A. IPMI can be used to remotely start and stop servers.
B. IPMI can be used to remotely log in to the operating system.
C. IPMI commands can be executed by using SNMP traps.
D. IPMI settings can be secured by backing up the Oracle Linux installation on the storage system.
Answer: A
Oracle 1z1-485 1z1-485 1z1-485
Explanation:
IPMI - short for Intelligent Platform Management Interface - is an interface standard that allows
remote management of a server from another using standardized interface. The servers in the
Exadata Database Machine follow that. It's not an Exadata command but rather a general Linux one.
To power on a cell or database server, issue this from another server: # ipmitool -H prolcel01-ilom
-U root chassis power on
To stop a server, use the shutdown command. To stop immediately and keep it down, i.e. not reboot,
execute:# shutdown -h -y now
NO.5 Which is the best location to point your customer to, for finding the latest Exadata patches?
A. owner's guide
B. Patch database in MyOracle Support
C. MyOracle Support note 888828.1
D. MyOracle Support for database patches, ULN for OS patches, and Sun Support for Server and
InfiniBand patches.
Answer: B
Oracle자격증 1z1-485기출문제 1z1-485기출문제 1z1-485
Explanation:
Before starting, we would like to share and note here two documents from My Oracle Support, aka
metalink. These notes must be the first place that you need to go to review before patching the
Exadata environment.
* (B) Database Machine and Exadata Storage Server 11g Release 2 (11.2) Supported Versions (Doc ID.
888828.1)
-This is for the second and third generation (V2 and X2) for Oracle Exadata, using Sun hardware.
* Database Machine and Exadata Storage Server 11g Release 1 (11.1) Supported Versions (Doc
ID. 835032.1)
* - This is for the first generation (V1) for Oracle Exadata, using HP hardware.
NO.6 Consider the following software changes that are performed manually on a Linux server:
1.Changes for Linux kernel firewall configuration
2.Changes for custom performance monitoring tools
3.Changes for security scan tools
4.Changes for Linux system performance optimization
Which of the software changes listed are permitted on Exadata Storage Servers?
A. 1, 2, 3, and 4
B. only 3 '
C. none
D. only 2
E. only 1 and 2
F. only 2 and 3
Answer: E
Oracle 1z1-485 1z1-485 1z1-485 1z1-485 dump
Explanation:
1. The Storage Server Patch is responsible for keeping our cell nodes always up-todate, fixing
possible problems, and this patch includes different component patches, like kernel patches,
firmware, operation system, etc... for the Storage Server. Incorrect: 3,4: security scan tools changes
and Linux system performance optimization changes would be on the database server.
NO.7 Consider this CellCLI command:
CellCLI> CREATE GRIDDISK ALL HARDDISK PREFIX=data, size=423G;
Which two statements describe what happens when you execute this command?
A. It creates one 423 GB grid disk on the first available cell hard disk.
B. It creates one 423 GB grid disk on each available cell hard disk.
C. It creates grid disks on the outermost 423 GB that is available on each hard disk.
D. It creates grid disks on the innermost 423 GB that is available on each hard disk.
E. It creates an Exadata Smart Flash Cache on all flash drives.
Answer: B,C
Oracle시험문제 1z1-485덤프 1z1-485시험문제 1z1-485 dumps
Explanation:
* Example: CellCLI> create griddisk all harddisk prefix=temp_dg, size=570G This command will
create 12 Griddisks, each of 570G in size from the outer (fastest) sectors of the underlying Harddisks.
It fills up the first 2 Celldisks entirely, because they have just 570G space free - the rest is already
consumed by the OS partition.
8. You get a Host Unreachable error when you attempt to connect to a server through a network
terminal command line. What are two other ways in which you can connect?
A. Use the ILOM Web GUI.
B. Use the dcli command at the root prompt on a database node.
C. Attach a terminal device to the back panel of the server with a serial cable.
D. Connect by using SQL *Plus.
E. Log in as root on the database node using the Net1 IP address.
Answer: A,C
Oracle 1z1-485덤프 1z1-485자격증 1z1-485 dumps
Explanation:
In addition to gaining shell access via SSH to manage your Exadata servers, you can also access them
from the Integrated Lights Out Management (ILOM) console or KVM console.
and should typically not require modifications unless you have changed network information inside
your database machine.
Note: A KVM switch (with KVM being an abbreviation for "keyboard, video and mouse") is a
hardware device that allows a user to control multiple computers from one or more[1] keyboard,
video monitor and mouse. Although multiple computers are connected to the KVM, typically a
smaller number of computers can be controlled at any given time
9. Identify three best practices for applying asmdeactivationoutcome es on Exadata Database
Servers and Exadata Storage Servers?
A. Backing up database servers and storage cells is not recommended before performing planned
maintenance.
B. Database server updates can be rolled back using the the "yum downgrade" procedure.
C. Bundle patches do not require testing before being installed on a production system.
D. It is recommended that Exadata systems with Data Guard configured use the "Standby First"
patching approach.
E. Patching should never be interrupted due to a connection drop. It is therefore recommended that
you use VNC or the screen utility.
F. Before patching cells in a rolling manner, you must check asmdeactivationoutcome amModestatus
and make sure that cells on all disks are online and that disks can be deactivated.
Answer: D,E,F
Oracle최신덤프 1z1-485 1z1-485 1z1-485 1z1-485 dumps 1z1-485시험문제
10. The mpstat output from OS Watcher shows a database node as being 90% idle on an average.
What would you do to get a full picture of CPU utilization on the entire Exadata RAC cluster?
A. Average the mpstat id1 output from all the nodes.
B. Ask application users if they have noticed a slowdown in screen response.
C. Look for an increase in batch job servicing times.
D. A & B above
Answer: A
Oracle최신덤프 1z1-485 1z1-485최신덤프
ITexamdump의 C_BOWI_30덤프의 VCE테스트프로그램과 VDCD510덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB6-871시험에 대비한 고품질 덤프와 70-331시험 최신버전덤프를 제공해드립니다. 최고품질 1Z1-536시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기