HP HP0-J12 시험문제

ITExamDump 에서 제공해드리는 HP HP0-J12덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 HP HP0-J12 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히HP HP0-J12시험을 패스할 수 있도록 최선을 다하고 있습니다.

ITExamDump에서 발췌한 HP인증 HP0-J12덤프는 전문적인 IT인사들이 연구정리한 최신버전 HP인증 HP0-J12시험에 대비한 공부자료입니다. HP인증 HP0-J12 덤프에 있는 문제만 이해하고 공부하신다면HP인증 HP0-J12시험을 한방에 패스하여 자격증을 쉽게 취득할수 있을것입니다.

HP인증 HP0-J12시험을 어떻게 패스할가 고민그만하고ITExamDump의HP 인증HP0-J12시험대비 덤프를 데려가 주세요.가격이 착한데 비해 너무나 훌륭한 덤프품질과 높은 적중율, ITExamDump가 아닌 다른곳에서 찾아볼수 없는 혜택입니다.

시험 번호/코드: HP0-J12

시험 이름: HP (Supporting ESL E-Series and EML E-Series Libraries)

최근 더욱 많은 분들이HP인증HP0-J12시험에 도전해보려고 합니다. ITExamDump에서는 여러분들의 시간돠 돈을 절약해드리기 위하여 저렴한 가격에 최고의 품질을 지닌 퍼펙트한HP인증HP0-J12시험덤플르 제공해드려 고객님의 시험준비에 편안함을 선물해드립니다. ITExamDump제품을 한번 믿어보세요.

많은 사이트에서도 무료HP HP0-J12덤프데모를 제공합니다. 우리도 마찬가지입니다. 여러분은 그러한HP HP0-J12데모들을 보시고 다시 우리의 덤프와 비교하시면, 우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아사될 것 입니다. 우리 ITExamDump사이트에서 제공되는HP인증HP0-J12시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 왜냐면 우리 ITExamDump에는 베터랑의 전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이HP인증HP0-J12시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이HP인증HP0-J12시험에 많은 도움이HP HP0-J12될 것입니다. ITExamDump 가 제공하는HP0-J12테스트버전과 문제집은 모두HP HP0-J12인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에HP HP0-J12시험을 패스하실 수 있습니다. 때문에HP HP0-J12덤프의 인기는 당연히 짱 입니다.

ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. HP인증 HP0-J12덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이HP인증 HP0-J12덤프 적중율과 패스율은 100% 보장해드립니다. HP인증 HP0-J12시험에 도전하려는 분들은ITExamDump 의HP인증 HP0-J12덤프로 시험을 준비할것이죠?

HP0-J12 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-J12.html

NO.1 What is reported by the LP/PNL sensor of an ESL E-Series tape library?
A.library door status
B.x-axis motor position
C.y-axis motor position
D.magazines and load ports status
Answer: D

HP   HP0-J12자료   HP0-J12

NO.2 Click the Exhibit button.
What does Number 2 on the exhibit represent?
A.x axis motor
B.y axis motor
C.optical scanner
D.home position sensor
Answer: B

HP   HP0-J12최신덤프   HP0-J12   HP0-J12

NO.3 What are advantages of using Secure Manager EML? (Select two.)
A.It allows library partitioning.
B.Management of direct backup is allowed.
C.It provides faster access to tape devices.
D.Device level mapping is easily configured.
E.User access management is easily configured.
Answer: AD

HP   HP0-J12자료   HP0-J12자료   HP0-J12

NO.4 What are the main considerations when choosing a location for an EML E-Series tape library? (Select
three.)
A.floor space
B.room height
C.power requirements
D.lighting requirements
E.grounding requirements
F.distance to disk storage
Answer: ACE

HP기출문제   HP0-J12   HP0-J12덤프   HP0-J12 dumps   HP0-J12최신덤프   HP0-J12

NO.5 With which management specification does the Command View TL Provider comply?
A.Direct Management Initiative (DMI)
B.Advanced Remote Management (ARM)
C.Simple Network Management Protocol (SNMP)
D.Storage Management Initiative Specification (SMI-S)
Answer: D

HP   HP0-J12   HP0-J12 pdf   HP0-J12 pdf   HP0-J12 pdf

NO.6 Click the Exhibit button.
Which ESL E-Series tape library component does the exhibit display?
A.cluster controller
B.cabinet controller
C.Interface Manager
D.Interface Controller
Answer: C

HP   HP0-J12자료   HP0-J12

NO.7 Click the Exhibit button.
Which component is connected to port E1 of the cluster controller if it is in drive cluster 0 of an ESL
E-Series tape library?
A.cabinet controller
B.Interface Controller
C.lower cluster controller
D.Interface Manager card
Tape Library
Answer: A

HP dumps   HP0-J12   HP0-J12 pdf

NO.8 Click the Exhibit button.
What is the maximum supported number of drives that can be installed in a CLM configuration?
A.40
B.44
C.60
D.64
Answer: B

HP pdf   HP0-J12시험문제   HP0-J12   HP0-J12자격증

NO.9 What is important to remember when changing from Manual to Automatic mode of the Interface
Manager of an ESL E-Series tape library?
A.All drives must be taken offline.
B.Fibre Channel cables must be unplugged.
C.Interface Controllers must be powered off first.
D.Any customizations created in Manual mode will be lost.
Answer: D

HP   HP0-J12   HP0-J12   HP0-J12 dumps   HP0-J12

NO.10 How often is the CommandView TL Health Summary screen updated?
A.every 30 seconds
B.at 15-minute intervals
C.whenever the library status changes
D.configurable to any value up to 900 seconds
Answer: C

HP   HP0-J12시험문제   HP0-J12인증   HP0-J12

NO.11 Click the Exhibit button.
Which ESL E-Series tape library configuration is shown in the Operator Control Panel Library screen?
A.last cabinet
B.primary cabinet
C.secondary cabinet
D.stand-alone cabinet
Answer: B

HP dump   HP0-J12   HP0-J12최신덤프   HP0-J12 dumps

NO.12 What is the maximum cartridge slot count in an EML E-Series library?
A.325
B.470
C.505
D.595
Answer: C

HP pdf   HP0-J12덤프   HP0-J12 pdf

NO.13 Which scheme is used in the Command Line Interface for drive and slot numbers in ESL E-Series
tape libraries?
A.0 based
B.1 based
C.2 based
D.Hex based
Answer: B

HP   HP0-J12시험문제   HP0-J12   HP0-J12

NO.14 Which statement about an EML E-Series library is correct?
A.It allows serverless backup with only a few configuration steps if a Secure Manager license is installed.
B.The initial configuration can be done over the front panel, Command View TL or the serial port on the
robotics controller using CLI.
C.It is fully compliant with the Storage Management Initiative Specifications (SMI-S) and can be
configured with HP Storage Essentials.
D.It bridges the capabilities and features between the business-class HP StorageWorks MSL Series and
enterprise-class ESL E-Series tape libraries.
Answer: D

HP   HP0-J12 pdf   HP0-J12   HP0-J12

NO.15 What must be configured in CommandView TL when manually adding an ESL E-Series library?
A.library IP address
B.library serial number
C.tape drive and robot SCSI IDs
D.Interface Manager user name and password
Answer: A

HP   HP0-J12 dumps   HP0-J12자료   HP0-J12자료   HP0-J12

NO.16 What are possible causes of inventory failure in ESL E-Series tape libraries? (Select two.)
A.The library has a drive failure.
B.One of the clusters is disconnected.
C.The library front is facing bright sunlight.
D.Unapproved bar code labels are being used.
E.The Interface Controller is disconnected from the Fibre Channel switch.
Answer: CD

HP   HP0-J12   HP0-J12 dump   HP0-J12시험문제   HP0-J12

NO.17 What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface
to?
A.tape devices
B.library robotics
C.management interface card
D.e2400-160 Interface Controller
Answer: B

HP   HP0-J12   HP0-J12   HP0-J12   HP0-J12기출문제

NO.18 Which tape device attribute does the ESL E-Series tape library Interface Manager use to determine
the physical location of each tape drive in the library?
A.bus number
B.SCSI address
C.serial number
D.drive slot position
Answer: C

HP dumps   HP0-J12자격증   HP0-J12자격증   HP0-J12   HP0-J12   HP0-J12

NO.19 What is the hard wired IP address of the Interface Manager card in an EML E-Series tape library on the
private network?
A.1.1.1.1
B.10.0.0.1
C.192.168.2.1
D.155.155.155.1
Answer: C

HP최신덤프   HP0-J12   HP0-J12   HP0-J12기출문제   HP0-J12 pdf   HP0-J12

NO.20 When is Lock Element Addressing used in the ESL E-Series library?
A.with multiple tape drive clusters
B.as an electronic lock of the access doors
C.when multiple Interface Controllers are used
D.for cross-linked libraries with three or more cabinets
Answer: D

HP pdf   HP0-J12기출문제   HP0-J12자격증

NO.21 Click the Exhibit button.
Which ESL E-Series tape library component (used to carry data cartridges to a secondary cabinet) is
shown in the figure?
A.CLM arm
B.CLM controller
C.picker assembly
D.cartridge transfer robot
Answer: A

HP dump   HP0-J12덤프   HP0-J12시험문제   HP0-J12자격증

NO.22 What are the standard cabling requirements for the Interface Manager card of an EML E-Series tape
library?
A.4 x Ethernet to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
B.4 x Ethernet to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
C.4 x Fibre Channel to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
D.4 x Fibre Channel to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
Answer: A

HP최신덤프   HP0-J12덤프   HP0-J12인증   HP0-J12시험문제

NO.23 For which connection, other than the cabinet controller, is the I2C network cable used in ESL E-Series
tape libraries?
A.external LANs
B.cluster controllers
C.interface management cards
D.Fibre Channel interface controllers
Answer: B

HP덤프   HP0-J12   HP0-J12   HP0-J12   HP0-J12 dumps

NO.24 Which HP document provides the most current, supported configurations for Enterprise class libraries
in a SAN environment?
A.Service Guide
B.SAN Design Guide
C.EBS Compatibility Matrix
D.training course documentation
Answer: C

HP pdf   HP0-J12   HP0-J12 dumps

NO.25 What is the purpose of the Stop button on the Operator Control Panel of ESL E-Series tape libraries?
A.to halt the robotics
B.to restart the library
C.to shut down the library
D.to pause a running backup process
Answer: A

HP자료   HP0-J12   HP0-J12

NO.26 What can be connected using the vacant Ethernet port on the right side of the cabinet controller in an
ESL E-Series tape library?
A.an external LAN
B.cluster controllers
C.interface management card
D.Fibre Channel interface controllers
Answer: A

HP   HP0-J12시험문제   HP0-J12덤프   HP0-J12인증

NO.27 Which parts of the Extended Tape Library Architecture are SNIA compliant and support the Storage
Management Initiative Specifications (SMI-S)? (Select two.)
A.Secure Manager
B.Interface Manager
C.Interface Controller
D.Robotics Controller
E.Command View Tape Library
Answer: BE

HP   HP0-J12   HP0-J12   HP0-J12   HP0-J12

NO.28 How many cartridge slots can be used in an 8U drive expansion module mounted at the bottom of an
EML E-Series library?
A.48
B.87
C.94
D.103
Answer: B

HP기출문제   HP0-J12자료   HP0-J12   HP0-J12최신덤프

NO.29 Click the Exhibit button.
In the exhibit, which item number represents the host Fibre Channel connections?
A.4
B.6
C.9
D.10
Answer: C

HP   HP0-J12   HP0-J12시험문제   HP0-J12

NO.30 What can you do to speed up the power-on process while troubleshooting an EML 71e library?
A.Remove all media from the library.
B.Power-on the library with the load port door open.
C.Disable the auto audit, remembering to re-enable it and reboot the library before leaving the customer
site.
D.Configure inventory mode to bar code labels not required, remembering to reset bar code labels
required before leaving the customer site.
Answer: C

HP dumps   HP0-J12 dumps   HP0-J12인증

우리ITExamDump 에서 여러분은 아주 간단히HP HP0-J12시험을 패스할 수 있습니다. 만약 처음HP HP0-J12시험에 도전한다면 우리의HP HP0-J12시험자료를 선택하여 다운받고 고부를 한다면 생가보다는 아주 쉽게HP HP0-J12시험을 통과할 수 있으며 무엇보다도 시험시의 자신감 충만에 많은 도움이 됩니다. 다른 자료판매사이트도 많겠지만 저희는 저희 자료에 자신이 있습니다. 우리의 시험자료는 모두 하이퀼러티한 문제와 답으로 구성되었습니다, 그리고 우리는 업데트를 아주 중요시 생각하기에 어느 사이트보다 더 최신버전을 보실 수 잇을것입니다. 우리의HP HP0-J12자료로 자신만만한 시험 준비하시기를 바랍니다. 우리를 선택함으로 자신의 시간을 아끼는 셈이라고 생각하시면 됩니다.HP HP0-J12로 빠른시일내에 자격증 취득하시고HPIT업계중에 엘리트한 전문가되시기를 바랍니다.