Genesys GE0-703 최신덤프

Genesys 인증 GE0-703시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.

Pass4Tes가 제공하는 제품을 사용함으로 여러분은 IT업계하이클래스와 멀지 않았습니다. Pass4Tes 가 제공하는 인증시험덤프는 여러분을Genesys인증GE0-703시험을 안전하게 통과는 물론 관연전업지식장악에도 많은 도움이 되며 또한 우리는 일년무료 업뎃서비스를 제공합니다.

Genesys인증GE0-703시험을 패스하기가 어렵다고 하면 합습가이드를 선택하여 간단히 통과하실 수 잇습니다. 우리ITExamDump에서는 무조건 여러분을 위하여 관연 자료덤프 즉 문제와 답을 만들어낼 것입니다. 우리덤프로Genesys인증GE0-703시험준비를 잘하시면 100%Genesys인증GE0-703시험을 패스할 수 있습니다. ITExamDump덤프로 여러분은Genesys인증GE0-703시험을 패스는 물론 여러분의 귀증한 간도 절약하실 수 있습니다.

시험 번호/코드: GE0-703

시험 이름: Genesys (GCP7 - Consultant, Voice Enterprise Edition)

ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 ITExamDump 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. ITExamDump 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.

지난 몇년동안 IT산업의 지속적인 발전과 성장을 통해Genesys 인증GE0-703시험은 IT인증시험중의 이정표로 되어 많은 인기를 누리고 있습니다. IT인증시험을ITExamDump덤프로 준비해야만 하는 이유는ITExamDump덤프는 IT업계전문가들이 실제시험문제를 연구하여 시험문제에 대비하여 예상문제를 제작했다는 점에 있습니다.

GE0-703 덤프무료샘플다운로드하기: http://www.itexamdump.com/GE0-703.html

NO.1 For most deployments with VCS configured in Behind-the-Switch mode using Genesys Framework,
DNIS is obtained through what mechanism?
A. VCS request to the T-Server via IVR Server
B. VCS requests to the Dialogic telephony board
C. a route point corresponding to the appropriate strategy
D. VCS request directly to the ACD/PBX
Answer: A

Genesys   GE0-703   GE0-703   GE0-703

NO.2 How are VoiceXML pages produced during a GVP call session?
A. Web application server generates VoiceXML when processing asp or jsp pages
B. VCS or IPCS produce VoiceXML when the call is initiated
C. EMPS produces VoiceXML when the request comes in
D. IPCS creates the VoiceXML when it relays SIP messages
Answer: A

Genesys시험문제   GE0-703   GE0-703   GE0-703

NO.3 Where is the default location of the DNIS Application Mapping Files?
A. <install dir>\CN\data
B. <install dir>\CN\web\dispenser\spd_data
C. <install dir>\CN\config
D. http://EMPS:9810/spm
Answer: B

Genesys   GE0-703   GE0-703 pdf   GE0-703덤프

NO.4 Which of the following features can be changed using the Element Management System (EMS) GUI
when monitoring a VCS?
A. the log level for each process
B. the default directory for logging
C. the Behind or In-Front configuration for that particular VCS
D. the speech recognition vendor for that particular VCS
Answer: A

Genesys   GE0-703덤프   GE0-703 dumps   GE0-703 pdf

NO.5 When you make a change to a parameter, such as PopGateway, Route1, Route Type - from InBound
to OutBound, what needs to happen for this change to go into effect?
A. restart WatchDog
B. no need to restart anything. New parameter value goes into effect immediately
C. restart the EMPS
D. restart MRCP Server
Answer: A

Genesys덤프   GE0-703   GE0-703 dumps   GE0-703   GE0-703최신덤프

NO.6 The <Application_Name>.xml files provides all of the __________.
A. VCS configuration information
B. voice application information
C. IPCS configuration information
D. web server configuration information
Answer: B

Genesys인증   GE0-703   GE0-703   GE0-703 pdf   GE0-703

NO.7 A logical group of ports is referred to as a __________.
A. Telephony Manager
B. Route
C. Page Collector
D. MRCP Client
Answer: B

Genesys   GE0-703 dump   GE0-703자격증   GE0-703   GE0-703 dumps   GE0-703

NO.8 The DNIS.xml provides __________.
A. the Primary Application URL
B. all application configuration information but no process information
C. the address of the IVR Server
D. the URL path to the <Application_Name>.XML
Answer: D

Genesys   GE0-703시험문제   GE0-703

NO.9 Which GVP software component is used to configure the various components of GVP including
application provisioning?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: A

Genesys자료   GE0-703   GE0-703기출문제   GE0-703기출문제   GE0-703   GE0-703

NO.10 The Voice Communication Server (VCS) processes __________ calls.
A. VoIP
B. IPCS
C. Web-based GUI
D. TDM
Answer: D

Genesys시험문제   GE0-703자격증   GE0-703   GE0-703   GE0-703

NO.11 In an In-Front of the Switch configuration using Genesys Framework, __________.
A. the VCS receives all call routing information from the strategy
B. the DNIS must be delivered to the VCS with the call
C. a connection with the IVR Server is required
D. ANI is required to initiate or begin the call.
Answer: B

Genesys   GE0-703시험문제   GE0-703   GE0-703   GE0-703   GE0-703시험문제

NO.12 When the parameter localconfig is set equal to 1 (localconfig = 1) in GVP.ini, the WatchDog service
will __________.
A. not read the local GVP.ini file, using the latest configuration contained in the LDAP database for the
VCS/IPCS parameter settings
B. read the local GVP.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
C. read the local watchdog.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
D. read the local EMPS.ini file for the VCS/IPCS parameters, not using use the latest configuration
contained in the LDAP database.
Answer: B

Genesys자료   GE0-703덤프   GE0-703 pdf

NO.13 Which GVP application is used to build and test voice applications?
A. Element Management Provisioning System
B. IP Call Manager
C. Voice Application Reporter
D. Genesys Studio
Answer: D

Genesys시험문제   GE0-703인증   GE0-703   GE0-703인증

NO.14 Which of the following are Windows prerequisites for VCS?
A. there are no Windows prerequisites
B. Active Directory
C. IIS and SNMP
D. SQL Server
Answer: C

Genesys덤프   GE0-703 dump   GE0-703 pdf   GE0-703자료   GE0-703 dump

NO.15 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A

Genesys자료   GE0-703시험문제   GE0-703

NO.16 When would you use the Import Server Instance CSV feature in EMPS?
A. Never. This feature is not available through the EMPS
B. Any time you want to make a change to any of the parameters in EMPS
C. You want to start the Watchdog service
D. When numerous changes are needed with servers or configuration of various components for a
server and in conjunction with Genesys Technical Support
Answer: D

Genesys   GE0-703시험문제   GE0-703   GE0-703

NO.17 The process on the VCS/IPCS that starts the other component processes is the __________.
A. Page Collector
B. IVR Server Client
C. Call Flow Assistant
D. WatchDog
Answer: D

Genesys   GE0-703   GE0-703 dumps   GE0-703자격증

NO.18 A Primary Voice Application URL is required when provisioning the IVR Profile. The Primary Voice
Application CANNOT include __________.
A. the fully qualified name of the web server that hosts the application
B. the numeric IP address of the web server that hosts the application
C. the name of the first page of the voice application
D. the path to the <Application Name>.XML file
Answer: D

Genesys dump   GE0-703인증   GE0-703 pdf   GE0-703   GE0-703 dumps

NO.19 Which VCS/IPCS component controls the TDM telephony or IP Telephony interfaces?
A. PopGateway
B. Page Collector
C. MRCP Client
D. Net Management
Answer: A

Genesys덤프   GE0-703 dumps   GE0-703   GE0-703인증

NO.20 The Internet Protocol Communication Server (IPCS) processes __________ calls.
A. SIP
B. HTML
C. TDM
D. EMPS
Answer: A

Genesys   GE0-703   GE0-703시험문제   GE0-703기출문제

NO.21 After WatchDog is started, GVP.ini file contains __________.
A. no configuration information for VCS/IPCS processes
B. application specific configuration information such as DNIS
C. the configuration information for VCS/IPCS processes, such as default log levels
D. only Dialogic configuration information
Answer: C

Genesys   GE0-703   GE0-703   GE0-703시험문제

NO.22 Under what circumstances is a username and password required to access the EMPS?
A. Never. By default, a username and password is not required since EMPS is only used for monitoring
purposes.
B. Always. When opening EMPS Login screen, the system will require users enter their username and
password.
C. Only when the EMPS is being accessed from a remote workstation. You are automatically
authenticated and can log in from a local machine.
D. Only when using SunOne Directory Server because OpenLDAP has no built-in security for the EMPS
login screen.
Answer: B

Genesys시험문제   GE0-703   GE0-703자격증   GE0-703기출문제   GE0-703기출문제

NO.23 Refer to the CTI Property tab in the Provisioning IVR profile section in the EMPS. The Default Route
Number is used when __________.
A. IVR Server is unable to contact the Solution Control Interface (SCI)
B. IVR Server is unable to contact the Universal Routing Server (URS), or when the URS is unable to
find an agent number to which it can route the call
C. IVR component, specifically Genesys Queue Adapter (GQA), cannot communicate with SCS.
D. IVR Server component cannot communicate with the Web Server
Answer: B

Genesys   GE0-703   GE0-703 pdf   GE0-703덤프

NO.24 The GVP VoiceXML application logic resides on __________.
A. a web server
B. the VCS
C. the VPM
D. the IPCM
Answer: A

Genesys   GE0-703   GE0-703

NO.25 In a Behind the Switch configuration, the VCS carries out instructions from __________.
A. IVR Server only, in the form of IVR ServerXML
B. T-Server only, in the form of TLib Events
C. Web Server, in the form of VoiceXML
D. IVR Server client, in the form of XML
Answer: C

Genesys최신덤프   GE0-703기출문제   GE0-703기출문제

NO.26 Which version of the VoiceXML Specification does GVP version 7.5 support?
A. VoiceXML 1.0
B. VoiceXML 1.1
C. VoiceXML 2.0
D. VoiceXML 3.0
Answer: C

Genesys최신덤프   GE0-703자료   GE0-703 pdf   GE0-703시험문제

NO.27 The <DNIS>.XML and <Application_Name>.xml files are generated when __________.
A. a call arrives at the VCS
B. an application is created and configured in EMPS
C. the WatchDog on the EMPS is restarted
D. requested by the IVR Server
Answer: B

Genesys pdf   GE0-703   GE0-703   GE0-703자료   GE0-703

NO.28 In the <Application_Name>.xml file, the IVRTimeout value determines __________.
A. how long URS waits for the response from web server before timing out and trying default routing
target.
B. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Backup IVR URL.
C. how long GQA waits for the connection with the IVR Server before using the Backup IVR URL.
D. how long VCS/IPCS waits for the response from web server before timing out and attempting to reach
the Primary IVR URL.
Answer: B

Genesys시험문제   GE0-703 dump   GE0-703

NO.29 The ability to record the caller's speech for application analysis is configured in an IVR Profile within
the EMPS and is referred to as __________.
A. OA&M
B. EMS Runtime
C. Enable ASR Transcoding
D. Enable ASR Logging
Answer: D

Genesys   GE0-703   GE0-703   GE0-703 dumps   GE0-703 dumps

NO.30 To bring up the 9810 listener window in EMPS you need to expand Server, CORE, click on
<ServerName> and then follow which links?
A. Right-click on the Server and view
B. Click link for Network Management GUI to open the 9810 listener
C. Click the link for Server Explorer to open the 9810 listener
D. There are no available links for the 9810 listener window in the EMPS.
Answer: B

Genesys   GE0-703자격증   GE0-703 dump   GE0-703시험문제   GE0-703

Genesys인증 GE0-703시험은 IT인증시험중 가장 인기있는 시험입니다. Genesys인증 GE0-703시험패스는 모든 IT인사들의 로망입니다. ITExamDump의 완벽한 Genesys인증 GE0-703덤프로 시험준비하여 고득점으로 자격증을 따보세요.