000-733 덤프 IBM 인증 시험

우리사이트가 다른 덤프사이트보다 우수한 점은 바로 자료들이 모두 전면적이고 적중률과 정확입니다. 때문에 우리ITExamDump를 선택함으로IBM인증000-733시험준비에는 최고의 자료입니다. 여러분이 성공을 위한 최고의 자료입니다.

IBM 000-733인증시험을 패스하려면 시험대비자료선택은 필수입니다. 우리ITExamDump에서는 빠른 시일 내에IBM 000-733관련 자료를 제공할 수 있습니다. ITExamDump의 전문가들은 모두 경험도 많고, 그들이 연구자료는 실제시험의 문제와 답과 거이 일치합니다. ITExamDump 는 인증시험에 참가하는 분들한테 편리를 제공하는 사이트이며,여러분들이 시험패스에 도움을 줄 수 있는 사이트입니다.

시험 번호/코드: 000-733
시험 이름: IBM (IBM Certified Application Developer-DB29)

IBM인증 000-733시험은 IT인증자격증중 가장 인기있는 자격증을 취득하는 필수시험 과목입니다. IBM인증 000-733시험을 패스해야만 자격증 취득이 가능합니다. ITExamDump의IBM인증 000-733는 최신 시험문제 커버율이 높아 시험패스가 아주 간단합니다. IBM인증 000-733덤프만 공부하시면 아무런 우려없이 시험 보셔도 됩니다. 시험합격하면 좋은 소식 전해주세요.

ITExamDump의IBM인증 000-733 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. IBM인증 000-733덤프로IBM인증 000-733시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. IBM인증 000-733덤프는 실제IBM인증 000-733시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.

000-733 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-733.html

NO.1 A table named ACTIVITY.LOG was created by executing the following statement:CREATE TABLE
activity.log (event VARCHAR(128), date DATE) Then, a stored procedure named ACTIVITY.LOGEVENT
was created by executing the following statement: CREATE PROCEDURE activity.logEvent(IN stmtType
CHAR(1)) LANGUAGE SQLMainBody: BEGIN DECLARE sqlerrm VARCHAR(256) DEFAULT '';
DECLARE ErrorIndicator CHAR(1) DEFAULT 'N';
SQLStmt: BEGIN
DECLARE CONTINUE HANDLER FOR SQLEXCEPTION
BEGIN
SET ErrorIndicator = 'Y';
END;
IF stmtType = 'I' THEN
INSERT INTO activity.log VALUES('Insert Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'U' THEN
INSERT INTO activity.log VALUES('Update Operation Performed.', CURRENT_DATE);
ELSEIF stmtType = 'D' THEN I
NSERT INTO activity.log VALUES('Delete Operation Performed.', CURRENT_DATE);
ELSE
SET ErrorIndicator = 'Y';
END IF;
END SQLStmt;
IF ErrorIndicator = 'Y' THEN
SIGNAL SQLSTATE '70000' SET message_text = 'Could not update activity log.';
END IF;
END MainBody
User USER1 has the authority to access/manipulate data in the ACTIVITY.LOG table as well as to invoke
the
procedure ACTIVITY.LOGEVENT. If user USER1 executes the following commands:
CONNECT TO sample USER user1 USING ibmdb2;
DELETE FROM activity.log;
CALL activity.logEvent('i'); What will be the results?
A. The string "Insert Operation Performed." and the system date will be written to the ACTIVITY.LOG
table.
B. The string "Update Operation Performed." and the system date will be written to the ACTIVITY.LOG
table.
C. The string "Delete Operation Performed." and the system date will be written to the ACTIVITY.LOG
table.
D. The error message 'SQL0438N Application raised error with diagnostic text: "Could not update activity
log.".SQLSTATE=70000' will be generated.
Answer: D

IBM인증   000-733   000-733덤프

NO.2 After installing the DB2 Express-C 9 it was discovered that the Development Workbench was not
available. What
was the reason for that?
A. It must be installed separately.
B. It is not supported with DB2 Express-C 9.
C. Since it is a licensed tool, it must be purchased from IBM.
D. Review the DB2 installation log for errors. Reinstall DB2 Express-C 9.
Answer: A

IBM   000-733인증   000-733자료

NO.3 Which of the following is the DB2 Data Provider for the .NET class that requires a database connection
to be open?
A. DB2DataSet
B. DB2RecordSet
C. DB2DataReader
D. DB2DataAdapter
Answer: C

IBM   000-733   000-733   000-733   000-733

NO.4 Given following table:
EMP
EMPNO NAME DEPTNO SALARY
=====
==== ======
======
0010 JOSH D95 30000
0020 JENNA D98 25000
0030 DYLAN
D95 10000
0040 TRACY D90 33000
and the following trigger definition:CREATE TRIGGER track_chgsAFTER UPDATE OF salary, name,
empno ON emp REFERENCING NEW_TABLE AS ntable FOR EACH STATEMENT MODE
DB2SQLBEGIN ATOMIC INSERT INTO changes SELECT empno, CURRENT TIMESTAMP FROM
ntable; END; After executing the following SQL statements:DELETE FROM changes; UPDATE emp SET
deptno = 'D98' WHERE deptno = 'D95'; INSERT INTO emp VALUES('0050', 'KEN', 'D90', 35000);
UPDATE emp SET salary = salary - 500 WHERE salary > 35000;UPDATE emp SET salary = salary +
1000 WHERE salary <= 25000;What value will be returned by this query?SELECT count(*) FROM
changes
A. 2
B. 3 C. 4
D. 6
Answer: A

IBM덤프   000-733   000-733   000-733시험문제

NO.5 An SQL procedure has been developed with several inline SQL PL statements encapsulated in a
dynamic compound SQL statement. The procedure had been tested and performed well. After making a
change to the last SQL statement the procedure not only failed to complete, but did not produce output
from any statements which were not modified. What is the best explanation for this behavior?
A. The dynamic compound SQL is atomic.
B. The procedure doesn't have any savepoints.
C. The procedure has not been correctly re-cataloged.
D. The dynamic compound SQL individual statements are logically dependent on each other.
Answer: A

IBM   000-733   000-733덤프   000-733

NO.6 An application running against a DB2 for AIX database needs to execute the following query:SELECT
t2.c2, t1.c3 FROM t1 INNER JOIN t2 ON t1.c1 = t2.c1 If table T1 resides in the DB2 for AIX database and
table T2 resides in a DB2 for i5/OS database, which of the followingDB2 object types must the identifier
T2 represent in order for this SQL statement to run successfully?
A. ALIAS
B. NICKNAME
C. SERVER TABLE
D. TABLE WRAPPER
Answer: B

IBM   000-733인증   000-733자격증

NO.7 Given the following table and view definitions: CREATE TABLE city ( cityid INT GENERATED
ALWAYS AS IDENTITY , city_name CHAR(10), state_code CHAR(2) CHECK(state_code IN
('CA','IL','NY','OH','TX')));CREATE VIEW city_view AS ( SELECT city_name||','||state_code AS fullname
FROM city WHERE state_code NOT IN ('OH','IL')); and the following trigger definition:CREATE
TRIGGER city_viewInput INSTEAD OF INSERT ON city_view REFERENCING NEW AS nFOR EACH
ROW MODE DB2SQLBEGIN ATOMIC DECLARE delim INT;SET delim = LOCATE(',', n.fullname);
INSERT INTO city(city_name,state_code) VALUES(SUBSTR(n.fullname, 1, delim - 1),
SUBSTR(n.fullname, delim + 1, 2));END; If the following SQL statments are executed:INSERT INTO city
VALUES(DEFAULT,'San Jose','CA') ; INSERT INTO city_view VALUES('Chicago,IL'); INSERT INTO city
VALUES(DEFAULT,'Detroit','MI'); INSERT INTO city VALUES(DEFAULT,'Austin','TX'); INSERT INTO
city_view VALUES('Denver,CO'); How many rows will be returned by the following query: SELECT *
FROM city
A. 1
B. 2
C. 3
D. 4
Answer: C

IBM   000-733 dumps   000-733자격증   000-733자료   000-733 dumps

NO.8 Which of the following is a SQL stored procedure which will return a resultset containing ID, NAME,
DEPT and JOB values out of the STAFF table?
A. CREATE PROCEDURE result_set() LANGUAGE SQL BEGIN SELECT id, name, dept, job FROM
staff; END
B. CREATE PROCEDURE result_set LANGUAGE SQL RESULT SETS 1 BEGIN SELECT id, name,
dept, job FROM staff; END
C. CREATE PROCEDURE result_set RESULT SETS 1 BEGIN DECLARE c1 CURSOR FOR SELECT id,
name, dept, job FROM staff; OPEN C1; END
D. CREATE PROCEDURE result_set()
LANGUAGE SQL RESULT SETS 1 BEGIN DECLARE c1 CURSOR WITH RETURN FOR SELECT id,
name, dept, job FROM staff; OPEN c1; END
Answer: D

IBM   000-733   000-733   000-733   000-733최신덤프   000-733최신덤프

NO.9 Table EMPLOYEE contains the following rows: EMPNO FIRSTNME LASTNAME WORKDEPT
000010.CHRISTINE HAAS A00 000020 MICHAEL THOMPSON B01 000030 SALLY KWAN C01 The
isolation level for Application 1 is set to CS and autocommit is disabled. The isolation level for Application
2 is set to CS and the autocommit is enabled. The following statements are executed in sequence:
Application 1:
DECLARE c1 CURSOR FOR SELECT * FROM employee ORDER BY empno OPEN C1 FETCH C1
FETCH C1 Application 2:
UPDATE employee SET lastname = 'MILLFORD' WHERE empno = '000020' Which of the following
statements is correct?
A. The UPDATE succeeds because Application 2 runs with autocommit enabled so no row level locks are
necessary for the update.
B. The UPDATE succeeds because Application 1 holds a row level lock that is compatible with the lock
required by Application 2.
C. The UPDATE fails because Application 1 holds a row level read lock that is in conflict with the lock
required by Application 2.C.
D. The UPDATE fails because the row level locks held by Application 1 have been escalated to table lock
so updates by other connections are disallowed.
Answer: B

IBM dumps   000-733기출문제   000-733 pdf   000-733 pdf   000-733

NO.10 After executing the following SQL statements: CREATE TABLE tab1 ( col1 INT ,col2 CHAR(1),
PRIMARY KEY(col1)); CREATE TABLE tab2 ( col1 INT ,col2 CHAR(1), FOREIGN KEY (col1)
REFERENCES tab1(col1) ON DELETE CASCADE ON UPDATE NO ACTION ); INSERT INTO tab1
VALUES(1, 'A'); INSERT INTO tab1 VALUES(2, 'B'); INSERT INTO tab2 VALUES(3, 'A'); INSERT INTO
tab2 VALUES(2, 'B'); UPDATE tab1 SET col1 = col1 + 1;DELETE FROM tab1 WHERE col2 = 'B';
What values will be returned by the following SQL query?SELECT col1, col2 FROM tab1 A.COL1 COL2
==== ==== 2 'B'
A. COL1 COL2 ==== ==== 2 'B'
B. COL1 COL2 ==== ==== 2 'A'
C. COL1 COL2 ==== ==== 1 'A' 2 'B'
D. COL1 COL2 ==== ==== 2 'A' 3 'B'
Answer: B

IBM   000-733   000-733   000-733   000-733덤프   000-733기출문제

NO.11 Given the following table definition:CREATE TABLE staff ( id SMALLINT NOT NULL, name
VARCHAR(9), dept SMALLINT, job CHAR(5)) Assuming that the following statements execute
successfully:Dim cmdStaff As DB2Command = cnDb2.CreateCommand() cmdStaff.CommandText =
"SELECT name FROM staff WHERE (job = @job)" Which of the following is the correct way to provide a
value for the parameter marker used?
A. cmdStaff.Parameters.Add("@job", "Mgr", CType(5, Char))
B. cmdStaff.Parameters.Add("@job", "Mgr", DB2Type.Char, 5)
C. cmdStaff.Parameters.Add(New DB2Parameter("@job", CType(5, Char))
cmdStaff.Parameters("@job").Value = "Mgr"
D. cmdStaff.Parameters.Add(New DB2Parameter("@job", DB2Type.Char, 5)
cmdStaff.Parameters("@job").Value ="Mgr"
Answer: D

IBM   000-733   000-733최신덤프   000-733기출문제

NO.12 Which of the following ADO .NET providers is supported by IBM DB2 Add-ins for Visual Studio?
A. OLE DB .NET Data Provider
B. DB2 Data Provider for .NET
C. ODBC Data Provider for .NET
D. DB2 for i5/OS .NET Provider
Answer: B

IBM   000-733   000-733자료   000-733기출문제   000-733 dumps   000-733최신덤프

NO.13 A .NET application executes a SQL request invoking the DB2Command.ExecuteReader method and a
syntax errorexception is thrown. Which of the following properties contains the SQLCode for this syntax
error?
A. DB2Error.SQLCode
B. SQLError.SQLCode
C. DB2Exception.SQLCode
D. SQLException.SQLCode
Answer: A

IBM최신덤프   000-733   000-733자료   000-733자료   000-733

NO.14 Which of the following restrictions pertains to embedded SQL external routines?
A. Environment variables with names that start with 'DB2' are not allowed.
B. Executing statements or commands that are connection related is not allowed.
C. Environment variable values that were set before the DB2 database manager is started are not
available.
D. When returning result sets from external nested stored procedures, a cursor cannot be opened with
the same name onmultiple nesting levels.
Answer: B

IBM인증   000-733   000-733   000-733인증
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.

NO.15 Which of the following is a characteristic of an application that uses a Distributed Unit of Work
(DUOW)?
A. A single transaction can only read and/or modify data stored on one database server.
B. Multiple transactions can only read and/or modify data stored on one database server.
C. A single transaction can read and/or modify data stored across multiple database servers.
D. Multiple transactions can read and/or modify data stored on multiple database servers provided each
transaction only accesses a single server.
Answer: C

IBM   000-733   000-733   000-733   000-733   000-733

NO.16 Which of the following SQL statements demonstrates the correct usage of a parameter marker?
A. SELECT ? FROM SYSCAT.TABLES
B. SELECT [] FROM SYSCAT.TABLES
C. SELECT CAST(? AS INTEGER) FROM SYSCAT.TABLES
D. SELECT CAST([] AS INTEGER) FROM SYSCAT.TABLES
Answer: C

IBM   000-733인증   000-733기출문제   000-733최신덤프

NO.17 If the following code is executed in the order shown:conDB2 As
DB2ConnectionconDB2.ConnectionString =
"Database=samplelx;UID=db2user;PWD=db2pwd;"conDB2.Open() Which of the following statements is
correct?
A. An exception is thrown because the server name has not been specified.
B. An exception is thrown because the server name and the port have not been specified.
C. The execution is successful provided the host name SAMPLEX has been previously defined in the
local hosts table.
D. The execution is successful provided the database alias SAMPLEX has been previously defined in the
local database catalog.
Answer: D

IBM자격증   000-733   000-733 dump   000-733

NO.18 Two OLTP applications run concurrently but frequent locking occurs which requires a fix to be applied.
Application A inserts rows into the table T1. Application B submits several queries against the table with a
Cursor Stability isolation level. What would be the best course of action to improve the system's
concurrency and performance?
A. Application B should be changed to access a view of table T1.
B. Application B should be changed to a Read Stability isolation level.
C. Application A should be changed to perform a commit after each INSERT operation.
D. Application A should be changed to include the NOT WITH HOLD clause on each INSERT operation.
Answer: C

IBM   000-733   000-733 dumps   000-733   000-733최신덤프

NO.19 What is the minimum privilege required to run a User Defined Function (UDF)?
A. CALL
B. EXECUTE
C. SYSCTRL
D. SYSMAINT
Answer: B

IBM시험문제   000-733   000-733

NO.20 Parameter markers are NOT permitted for which of the following statements?
A. CALL
B. DELETE C. EXECUTE IMMEDIATE
D. SET CURRENT SQLID
Answer: C

IBM dump   000-733   000-733최신덤프   000-733기출문제

IBM 000-733인증시험패스 하는 동시에 여러분의 인생에는 획기적인 일 발생한것이죠, 사업에서의 상승세는 당연한것입니다. IT업계종사자라면 누구나 이런 자격증을 취득하고싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 많습니다. 패스할확율은 아주 낮습니다. 노력하지않고야 당연히 불가능하죠.IBM 000-733시험은 기초지식 그리고 능숙한 전업지식이 필요요 합니다. 우리ITExamDump는 여러분들한테IBM 000-733시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. 우리ITExamDump의IBM 000-733시험관련자료로 여러분은 짧은시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.