Microsoft인증070-564시험은 현재 치열한 IT경쟁 속에서 열기는 더욱더 뜨겁습니다. 응시자들도 더욱더 많습니다. 하지만 난이도난 전혀 낮아지지 않고 이지도 어려운 시험입니다. 어쨌든 개인적인 지식 장악도 나 정보기술 등을 테스트하는 시험입니다. 보통은Microsoft인증070-564시험을 넘기 위해서는 많은 시간과 신경이 필요합니다.
우리ITExamDump 에서는 여러분들한테 아주 편리하고 시간 절약함과 바꿀 수 있는 좋은 대책을 마련하였습니다. ITExamDump에서는Microsoft MB7-840인증시험관련가이드로 효과적으로Microsoft MB7-840시험을 패스하도록 도와드리겠습니다.만약 여러분이 다른 사이트에서도 관련덤프자료를 보셨을 경우 페이지 아래를 보시면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일것입니다.
네트워크 전성기에 있는 지금 인터넷에서Microsoft 인증070-564시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여Microsoft 인증070-564시험을 한방에 통과하도록 도와드립니다.
시험 이름: PRO: Designing and Developing ASP.NET Applications using Microsoft .NET Framework 3.5
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 070-564자료
100% 합격율 보장
Q&A: 109 문항 070-564 dump
업데이트: 2014-06-12
070-564자료: >>펼쳐보기
시험 이름: NAV 2009 C/SIDE Introduction
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 MB7-840국제자격증
100% 합격율 보장
Q&A: 109 문항 MB7-840시험후기
업데이트: 2014-06-12
MB7-840국제자격증: >>펼쳐보기
자기한테 딱 맞는 시험준비공부자료 마련은 아주 중요한 것입니다. ITExamDump는 업계에 많이 알려져있는 덤프제공 사이트입니다. ITExamDump덤프자료가 여러분의 시험준비자료로 부족한 부분이 있는지는 구매사이트에서 무료샘플을 다운로드하여 덤프의일부분 문제를 우선 체험해보시면 됩니다. ITExamDump에서 제공해드리는 퍼펙트한 덤프는 여러분이 한방에 시험에서 통과하도록 최선을 다해 도와드립니다.
Microsoft인증 MB7-840시험준비중이신 분들은Microsoft인증 MB7-840시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.
070-564 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-564.html
NO.1 You are creating ASP.NET applications by using the .NET Framework 3.5.
The applications will be hosted on the same physical Web server.
You have the following page layout requirements:
- A common page layout that applies to all the ASP.NET pages across the Web applications
- All pages to automatically reflect changes that are made to the common page layout
You create a master page that provides the page layout.
You need to implement a solution that meets the layout requirements.
Which three additional tasks should you perform? (Each correct answer presents part of the solution.
Choose three.)
A. Add a @ MasterType directive to each ASP.NET page.
B. Add a ContentPlaceholder control to each ASP.NET page.
C. Copy the master page into a single folder on the Web server.
D. Set the MasterPageFile property on each ASP.NET page to the virtual path of the master page file.
E. Configure a virtual directory within the default Web site, and point the virtual directory to the folder that
contains the master page.
F. Configure a virtual directory within each Web application, and point the virtual directory to the folder that
contains the master page.
Answer: CDF
Microsoft IT자격증시험 070-564 IT자격증시험자료 070-564최신덤프 070-564 IT자격증시험 070-564인증덤프
NO.2 You are creating an ASP.NET application by using the .NET Framework 3.5. You need to ensure that
the application meets the following requirements: Each page must have a different layout of page
elements. The display properties of the ASP.NET controls must be consistent across pages, regardless of
the control style properties set within the individual pages. What should you do?
A. Create a master page that references an external cascading style sheet file.
B. Define a skin for each type of ASP.NET server control that is used in the application.
C. In the Web.config file, specify a value for the masterPageFile attribute of the pages element.
D. In the Web.config file, specify a value for the styleSheetTheme attribute of the pages element.
Answer: B
Microsoft최신버전덤프 070-564강좌 070-564응시료 070-564 070-564자격시험 070-564자격증신청
NO.3 You are creating ASP.NET applications by using the .NET Framework 3.5.
You maintain a Web site that contains several nested pages defined in its site map file.
You plan to implement a control on each page of the Web site.
You need to ensure that the control meets the following requirements:
- It indicates the current location of the user in the Web site navigation structure.
- It displays a maximum of three pages.
What should you do?
A. Add a TreeView control on each page, and set the MaxDataBindDepth property to 3.
B. Add a SiteMapPath control on each page, and set the ParentLevelsDisplayed property to 3.
C. Add a SiteMapPath control in the root of the Web site, and set the ParentLevelsDisplayed property to
3.
D. Add a TreeView control on each page, and set the StartingNodeOffsetproperty in the
XmlSiteMapProvider class to 3.
Answer: B
Microsoft자격증 070-564후기 070-564인증덤프 070-564시험
NO.4 You are creating an ASP.NET application by using the .NET Framework 3.5.
You create a custom Web server control to implement the shopping cart functionality in the application.
You add the following code fragment to the Web.config file of the application.
<authentication mode="None" />
< sessionState mode=" SQLServer " />
You need to ensure that when the user re-opens the Web browser, the application retains the state of the
shopping cart.
Which state management strategy should you use?
A. HTTP cookies
B. Cache object
C. Profile properties
D. SessionState object
Answer: A
Microsoft 070-564 070-564 IT자격증 070-564
NO.5 You are creating an ASP.NET application by using the .NET Framework 3.5.
You use the built-in ASP.NET Web server controls in all the Web forms of the application.
You access and modify the properties of all Web server controls in the code-behind class of the Web
forms.
You need to add custom client-side and AJAX behavior to the ASP.NET Web server controls.
What should you do?
A. Add an UpdatePanel control in the Web forms for each built-in ASP.NET Web server control.
Place the corresponding ASP.NET Web server controls inside the UpdatePanel controls.
Create a custom extender control for each built-in ASP.NET Web server control.
B. Add the extender controls along with the ASP.NET Web server controls in the Web forms.
Create a Web UserControl control for each built-in ASP.NET Web server control. Encapsulate the
corresponding ASP.NET Web server control and the client-side and AJAX behavior code in the
UserControl control.
C. Replace each built-in ASP.NET Web server control with the UserControl control in the Web forms.
Create a custom Web server control for each built-in ASP.NET Web server control.
Add the corresponding ASP.NET Web server control as a child control, and encapsulate the client- side
and AJAX behavior code in the custom Web server control.
D. Replace each built-in ASP.NET Web server control with the custom Web server control in the Web
forms.
Answer: B
Microsoft자격증 070-564기출문제 070-564기출문제
NO.6 You are creating an ASP.NET application by using the .NET Framework 3.5. You create a Web form in
your application by using a data-bound Web server control. The Web form displays employee information.
You need to ensure that the data-bound Web server control meets the following business requirements: It
provides built-in sort capabilities. It displays multiple records by using a default tabular format. Which
data-bound Web server control should you use?
A. DataList
B. ListView
C. GridView
D. DetailsView
Answer: C
Microsoft최신덤프 070-564시험후기 070-564자격증신청 070-564덤프자료
NO.7 You are creating an ASP.NET application by using the .NET Framework 3.5. You create a Web form in
the application that allows users to provide personal information. You add a DropDownList control to the
form to capture the residential country of the user. The default item that the DropDownList control displays
is the Select Country option. You need to ensure that users select a valid country other than the default
option from the DropDownList control. You also need to ensure that the form is created and maintained by
using the minimum amount of development effort. Which validation control should you use?
A. RangeValidator
B. CustomValidator
C. RequiredFieldValidator
D. RegularExpressionValidator
Answer: C
Microsoft시험후기 070-564 070-564
NO.8 You are creating an ASP.NET application by using the .NET Framework 3.5. Users access the
application by using different operating systems and different browsers. You plan to incorporate a new
control in the application. You need to ensure that the control meets the following business requirements:
It can be accessed through the Microsoft Visual Studio .NET 2008 toolbox. It can operate without any
other prerequisite controls. Which type of control should you choose?
A. A user control
B. An ActiveX control
C. A Web Parts control
D. A custom server control
Answer: D
Microsoft국제공인자격증 070-564덤프 070-564자격증 070-564자료
댓글 없음:
댓글 쓰기