Citrix 인증 1Y0-A28시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
Citrix인증 1Y0-992시험을 패스하여 자격증을 취득하는게 꿈이라구요? ITExamDump에서 고객님의Citrix인증 1Y0-992시험패스꿈을 이루어지게 지켜드립니다. ITExamDump의 Citrix인증 1Y0-992덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.
ITExamDump는 많은 분들이Citrix인증1Y0-A19시험을 응시하여 성공하도록 도와주는 사이트입니다ITExamDump의 Citrix인증1Y0-A19 학습가이드는 시험의 예상문제로 만들어진 아주 퍼펙트한 시험자료입니다. Citrix인증1Y0-A19시험은 최근 가장 인기있는 시험으로 IT인사들의 사랑을 독차지하고 있으며 국제적으로 인정해주는 시험이라 어느 나라에서 근무하나 제한이 없습니다. ITExamDump로 여러분은 소유하고 싶은 인증서를 빠른 시일내에 얻게 될것입니다.
연구결과에 의하면Citrix인증 1Y0-A28시험은 너무 어려워 시험패스율이 낮다고 합니다. ITExamDump의 Citrix인증 1Y0-A28덤프와 만나면Citrix인증 1Y0-A28시험에 두려움을 느끼지 않으셔도 됩니다. ITExamDump의 Citrix인증 1Y0-A28덤프는 엘리트한 IT전문가들이 실제시험을 연구하여 정리해둔 퍼펙트한 시험대비 공부자료입니다. 저희 덤프만 공부하시면 시간도 절약하고 가격도 친근하며 시험준비로 인한 여러방면의 스트레스를 적게 받아Citrix인증 1Y0-A28시험패스가 한결 쉬워집니다.
시험 이름: Implementing NetScaler 10 for Networking and Traffic Optimization
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-A28시험문제
100% 합격율 보장
Q&A: 123 문항 1Y0-A28시험문제
업데이트: 2014-05-19
1Y0-A28시험문제: >>펼쳐보기
시험 이름: MetaFrame Presentation Server withFeature Release 3 Deployment and Support CCEAQandA
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-992자격시험
100% 합격율 보장
Q&A: 139 문항 1Y0-992덤프
업데이트: 2014-05-19
1Y0-992자격시험: >>펼쳐보기
시험 이름: Citrix XenDesktop 5 Basic Administration
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-A19덤프
100% 합격율 보장
Q&A: 90 문항 1Y0-A19시험문제
업데이트: 2014-05-19
1Y0-A19덤프: >>펼쳐보기
Citrix인증1Y0-992시험은 IT인증시험과목중 가장 인기있는 시험입니다. ITExamDump에서는Citrix인증1Y0-992시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. ITExamDump에서 발췌한 Citrix인증1Y0-992덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.
ITExamDump에서 최고최신버전의Citrix인증1Y0-A28시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에Citrix인증1Y0-A28시험을 패스하실 수 있습니다.Citrix인증1Y0-A28관련 최고의 자료는 현재까지는ITExamDump덤프가 최고라고 자신 있습니다.
ITExamDump의Citrix인증 1Y0-A19덤프는 시험패스율이 거의 100%에 달하여 많은 사랑을 받아왔습니다. 저희 사이트에서 처음 구매하는 분이라면 덤프풀질에 의문이 갈것입니다. 여러분이 신뢰가 생길수 있도록ITExamDump에서는Citrix인증 1Y0-A19덤프구매 사이트에 무료샘플을 설치해두었습니다.무료샘플에는 5개이상의 문제가 있는데 구매하지 않으셔도 공부가 됩니다. Citrix인증 1Y0-A19덤프로Citrix인증 1Y0-A19시험을 준비하여 한방에 시험패하세요.
1Y0-A28 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Y0-A28.html
NO.1 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D
Citrix 1Y0-A28 IT자격증시험자료 1Y0-A28자료
NO.2 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B
Citrix시험정보 1Y0-A28강좌 1Y0-A28덤프
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A
Citrix Dump 1Y0-A28인증 1Y0-A28최신버전덤프
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B
Citrix덤프 1Y0-A28 1Y0-A28시험일정 1Y0-A28시험정보 1Y0-A28자료
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C
Citrix인증덤프 1Y0-A28자격증 1Y0-A28 IT자격증시험자료
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C
Citrix IT자격증시험 1Y0-A28 PDF 1Y0-A28 IT시험덤프 1Y0-A28자료 1Y0-A28시험후기 1Y0-A28 IT덤프
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B
Citrix 1Y0-A28 1Y0-A28시험문제 1Y0-A28교재 1Y0-A28
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C
Citrix기출문제 1Y0-A28 IT덤프 1Y0-A28 IT덤프 1Y0-A28기출문제 1Y0-A28
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B
Citrix 1Y0-A28 dumps 1Y0-A28인증 1Y0-A28덤프다운
NO.3 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B
Citrix최신덤프 1Y0-A28 Dumps 1Y0-A28자격증신청
NO.4 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C
Citrix자격시험 1Y0-A28자료 1Y0-A28 1Y0-A28최신덤프
NO.5 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B
Citrix최신덤프 1Y0-A28자격증 1Y0-A28시험일정
댓글 없음:
댓글 쓰기