근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. IFPUG인증 I40-420시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이IFPUG인증 I40-420시험을 한방에 패스하도록 실제시험문제에 대비한IFPUG인증 I40-420덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.
ITExamDump의IFPUG인증 I40-420덤프의 인지도는 아주 높습니다. 인지도 높은 원인은IFPUG인증 I40-420덤프의 시험적중율이 높고 가격이 친근하고 구매후 서비스가 끝내주기 때문입니다. ITExamDump의IFPUG인증 I40-420덤프로IFPUG인증 I40-420시험에 도전해보세요.
ITExamDump에서는 IFPUG인증 I40-420시험을 도전해보시려는 분들을 위해 퍼펙트한 IFPUG인증 I40-420덤프를 가벼운 가격으로 제공해드립니다.덤프는IFPUG인증 I40-420시험의 기출문제와 예상문제로 제작된것으로서 시험문제를 거의 100%커버하고 있습니다. ITExamDump제품을 한번 믿어주시면 기적을 가져다 드릴것입니다.
시험 번호/코드: I40-420
시험 이름: IFPUG (Certified Function Point Specialist )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 249 문항
업데이트: 2014-03-26
IFPUG인증 I40-420시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. ITExamDump는 여러분을 위해 최신IFPUG인증 I40-420시험에 대비한IFPUG인증 I40-420덤프를 발췌하였습니다. IFPUG인증 I40-420덤프는IFPUG인증 I40-420시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면ITExamDump의 IFPUG인증 I40-420덤프를 추천합니다.
IFPUG I40-420인증시험이 이토록 인기가 많으니 우리ITExamDump에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며, ITExamDump 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 ITExamDump선택은 정답입니다. ITExamDump선택함으로 당신이 바로 진정한IT인사입니다.
I40-420 덤프무료샘플다운로드하기: http://www.itexamdump.com/I40-420.html
NO.1 Which of the following is NOT an example of the purpose of a function point count?
A. To enable comparison of functionality delivered by two applications
B. To determine maintenance support cost per function point
C. To understand the percentage of lines of code that is being reused across three different applications
D. To determine the effort and duration of a development project
Answer: C
IFPUG시험문제 I40-420 dump I40-420기출문제
NO.2 Which of the following statements regarding functional size measurement is true?
A. Early functional size measurements can never change during design and coding phase
B. It is quite normal to identify additional functionality that was not specified in the original requirements in
the form of scope creep
C. It is not necessary to update the application functional size upon completion of an enhancement.
D. Both B and C
Answer: B
IFPUG I40-420 I40-420
NO.3 An EI is defined as:
A. an elementary process that processes data sent from outside the application boundary
B. control information sent from outside the user view
C. an elementary process that processes data or control information sent from outside the application's
boundary
D. All of the above
Answer: C
IFPUG자격증 I40-420 I40-420 I40-420
NO.4 "Requirements specifically requested by the user to complete an elementary process" defines which of
the following terms?
A. Control information
B. Processing logic
C. Maintain
D. User identifiable
Answer: B
IFPUG I40-420 dumps I40-420
NO.5 The primary intent of an EI is to maintain:
A. One or more ILFs or alter the behavior of the application
B. One or more ILFs
C. One or more EIFs or alter the behavior of the application
D. One or more EIFs
Answer: A
IFPUG I40-420 I40-420덤프 I40-420인증
NO.6 Which of the following is NOT true of a boundary?
A. It encloses the logical data maintained by the application
B. It is the physical interface between the software under study and its users
C. It is dependent on the user's external business view of the application and is independent of technical
and/or implementation considerations
D. It defines what is external to the application
Answer: B
IFPUG시험문제 I40-420 I40-420 dumps I40-420인증
NO.7 When counting DETs which of the following rules apply?
A. Count a DET for each recursive field on the ILF or EIF
B. Count a DET for each piece of data in an ILF or EIF required by the user to establish a relationship with
another ILF or EIF
C. Count a DET for each repeating field that is identical in format
D. Count a DET for each field that appears more than once in an ILF or EIF
Answer: B
IFPUG덤프 I40-420 I40-420 dump I40-420 pdf
NO.8 Which of the following defines the purpose of a count?
A. Provides an answer to a business question, and it is the business question that determines the
purpose
B. Influences the positioning of the application between the software under review and the surrounding
software
C. Influences the type of FP count to answer the business problem under investigation
D. Provides an input to the estimation process needed to determine the level of effort required to develop
the first release of an application
Answer: A
IFPUG I40-420 I40-420인증 I40-420 I40-420 I40-420기출문제
NO.9 What is a user identifiable group of logically related data or control information referenced by the
application, but maintained within the boundary of another application?
A. An ILF
B. An IIF
C. An EIF
D. An ELF
Answer: C
IFPUG인증 I40-420 dump I40-420 I40-420 dump
NO.10 What is true about conversion functionality?
A. Transactional or data functions provided to convert data and /or provide other user specified
conversion requirements
B. Exists only during the development or enhancement of an application
C. Conversion functionality is outside the scope of FP counting
D. Both A and B
Answer: D
IFPUG I40-420 I40-420자격증 I40-420 dumps
NO.11 Which of the following statements about an External Input is true?
A. Has the primary intent to maintain one or more ILFs
B. An elementary process to hold data or control information from outside the boundary
C. Has the primary intent to alter the behavior of a transaction
D. Has the primary intent to reference one or more EIFs
Answer: A
IFPUG시험문제 I40-420자료 I40-420덤프 I40-420
NO.12 An application FP count is defined as:
A. a measure of the current functions the application provides the user
B. the initial development project FP count
C. an enhancement project that alters the applications functions
D. the activity of applying this International Standard to measure the functional size of an application
Answer: D
IFPUG자료 I40-420덤프 I40-420자료
NO.13 Control information is defined as data that:
A. defines an elementary process of the application being counted
B. influences an elementary process of the application being counted
C. controls an elementary process of the application being counted
D. does not influence an elementary process of the application being counted
Answer: B
IFPUG dumps I40-420 I40-420
NO.14 Which of the following statements is (are) true regarding an application functional size (FS)?
A. It provides a measure of the functionalities that an application provides to the user
B. It is never updated after the initial application installation
C. It is associated with an application's lifecycle
D. Both A and C
Answer: D
IFPUG I40-420 I40-420 I40-420 I40-420
NO.15 Which category (ies) of data entities is (are) usually identified to satisfy the Functional User
Requirements?
A. Business data
B. Reference data
C. Code data
D. Both A and B
Answer: D
IFPUG인증 I40-420덤프 I40-420자료 I40-420자료 I40-420최신덤프
NO.16 An example of the purpose of an FP count is to provide:
A. input to the estimation process needed to determine the level of effort to develop the first release of an
application
B. a comparison of functionality delivered by two different suppliers' packages
C. determine the size of an application as part of the organization's effort to determine the size of its
software portfolio
D. All of the above
Answer: D
IFPUG dumps I40-420 I40-420덤프
NO.17 Which of the following statements regarding the counting scope is true?
A. It defines the set of Functional User Requirements to be included in the FP count
B. It always includes more than one application
C. It determines the purpose of the applications being counted
D. It defines a (sub) set of the modules being sized
Answer: A
IFPUG I40-420 I40-420기출문제
NO.18 What is a (are) valid example(s) of code data?
A. Substitution data
B. Static data
C. Valid values
D. All of the above
Answer: D
IFPUG시험문제 I40-420덤프 I40-420기출문제 I40-420
NO.19 Which of the following is an attribute used to represent relationships of one entity to another.?
A. Primary key
B. Secondary key
C. Foreign key
D. Domestic key
Answer: C
IFPUG I40-420최신덤프 I40-420시험문제
NO.20 What is an elementary process?
A. The smallest unit of activity that is meaningful to the developer
B. The largest unit of activity that is meaningful to the user
C. The smallest unit of activity that is meaningful to the user
D. The largest unit of activity that is meaningful to the developer
Answer: C
IFPUG기출문제 I40-420 I40-420 I40-420 I40-420시험문제
ITexamdump의 MSC-331덤프의 VCE테스트프로그램과 HP2-Z24덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-652시험에 대비한 고품질 덤프와 000-273시험 최신버전덤프를 제공해드립니다. 최고품질 000-N45시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기