CompTIA인증RF0-001시험을 위하여 최고의 선택이 필요합니다. ITExamDump 선택으로 좋은 성적도 얻고 하면서 저희 선택을 후회하지 않을것니다.돈은 적게 들고 효과는 아주 좋습니다.우리ITExamDump여러분의 응시분비에 많은 도움이 될뿐만아니라CompTIA인증RF0-001시험은 또 일년무료 업데이트서비스를 제공합니다.작은 돈을 투자하고 이렇게 좋은 성과는 아주 바람직하다고 봅니다.
인터넷에는CompTIA인증 RF0-001시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은CompTIA인증 RF0-001공부자료중 대부분 분들께서 저희ITExamDump를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. ITExamDump의 CompTIA인증 RF0-001덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.
CompTIA인증 RF0-001 시험은 최근 제일 인기있는 인증시험입니다. IT업계에 종사하시는 분들은 자격증취득으로 자신의 가치를 업그레이드할수 있습니다. CompTIA인증 RF0-001 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다. ITExamDump에서 제공해드리는CompTIA인증 RF0-001 덤프는 여러분들이 한방에 시험에서 통과하도록 도와드립니다. 덤프를 공부하는 과정은 IT지식을 더 많이 배워가는 과정입니다. 시험대비뿐만아니라 많은 지식을 배워드릴수 있는 덤프를ITExamDump에서 제공해드립니다. ITExamDump덤프는 선택하시면 성공을 선택한것입니다.
시험 번호/코드: RF0-001
시험 이름: CompTIA (RFID+ Certification)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 162 문항
업데이트: 2013-10-31
ITExamDump선택으로CompTIA RF0-001시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서CompTIA RF0-001관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는CompTIA RF0-001덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.
RF0-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/RF0-001.html
NO.1 Loss of connection between an interrogator and the edgeware/middleware would result in which of the
following?
A. Only active RFID tag data would be processed.
B. No tag data would be processed.
C. Tag data would be sent directly to the Warehouse Management System (WMS).
D. Only interrogator status would be tracked.
Answer: B
CompTIA RF0-001 RF0-001 pdf
NO.2 For a corrugated case filled with liquor bottles containing metal lids, all of the following locations are
acceptable for optimizing the performance of a passive high frequency (HF) RFID smart label EXCEPT on
the: (Select TWO).
A. side near the bottom where there is the most amount of liquid.
B. side near the top where there is the least amount of liquid.
C. bottom where there is the most amount of glass.
D. top near the metal lids.
Answer: AD
CompTIA자격증 RF0-001최신덤프 RF0-001자격증
NO.3 In a facility with several automated print and apply printers, cases frequently get to the palletizer without
RFID labels. One way to correct this is to:
A. install an interrogation zone down stream from the labeler with a reject system.
B. have an interrogator on the palletizer.
C. use better quality labels.
D. use a hand-held interrogator to scan for missing labels at end of production line.
Answer: A
CompTIA덤프 RF0-001기출문제 RF0-001 dumps RF0-001 RF0-001최신덤프
NO.4 An Electronic Product Code (EPC) Class 1 Gen 2 RFID system reads the EPC data from memory bank
zero, but the 64-bit EPC code is always zero. Which of the following is MOST likely the cause of the
problem?
A. The EPC code is stored in Bank 1.
B. The tag has been killed.
C. The EPC code was never written to the tag.
D. The access password is zero.
Answer: A
CompTIA RF0-001 pdf RF0-001 RF0-001자료
NO.5 It is important to know where an RFID inlay is located within a tag during printing because: (Select
TWO).
A. the inlay location directs the printer to print landscape or portrait.
B. the inlay sets the speed of the printer.
C. printing over the chip may cause damage.
D. timing from leading edge is critical to the encoding process.
Answer: CD
CompTIA RF0-001 RF0-001시험문제 RF0-001
NO.6 A company wants to track personnel using RFID with a resolution within 10 feet (3.1 meters). Which of
the following RFID systems would provide the BEST results?
A. Active Real Time Locating System (RTLS)
B. Passive ultra high frequency (UHF) RFID system with hand-held interrogators
C. Passive high frequency (HF) RFID system with interrogators at entry points
D. Global Positioning System (GPS)
Answer: A
CompTIA기출문제 RF0-001 RF0-001 RF0-001 dump
NO.7 Which of the following materials have absorptive properties in relation to ultra high frequency (UHF)?
(Select TWO).
A. Damp cardboard
B. Glass
C. Conductive liquids
D. Metal
Answer: AC
CompTIA자료 RF0-001인증 RF0-001
NO.8 All of the following are true of widely implemented "slap and ship" programs EXCEPT they:
A. make it difficult to optimize label application for the container.
B. are more susceptible to electrostatic discharge (ESD) than in-line automatic applicators.
C. are lower in cost than application in manufacturing.
D. are more likely to break the bond between the antenna and the chip.
Answer: C
CompTIA RF0-001시험문제 RF0-001 RF0-001
NO.9 A new batch of tags is received for an existing system. When the new tags are introduced into the
system, the interrogation zones stop transmitting tag data. Which of the following is MOST likely the
source of the problem?
A. The new tags are all bad.
B. The new tags are the wrong type for the system.
C. A tag virus has been introduced by the new tags.
D. The interrogators have issued the kill command to the tags.
Answer: B
CompTIA덤프 RF0-001 RF0-001 RF0-001 pdf
NO.10 When troubleshooting an interrogation zone, an operator observes that the interrogator is not
responding to external input or reading tags. The lights are on indicating it has power and network
connectivity. Which of the following would be the next step for the operator to take?
A. Replace the antenna cable.
B. Replace the interrogator.
C. Reboot the interrogator.
D. Reboot the antenna.
Answer: C
CompTIA RF0-001 dump RF0-001자료 RF0-001최신덤프
NO.11 RFID media should be stored in:
A. electrostatic discharge (ESD) protected packaging.
B. metal containers.
C. rolls of ten.
D. the order that it was received.
Answer: A
CompTIA시험문제 RF0-001 RF0-001 RF0-001 pdf
NO.12 Tags placed on small boxes uniformly stacked on a pallet are unreadable unless the pallet is rotated.
This is a symptom of tag:
A. propagation.
B. size.
C. shadowing.
D. polarity.
Answer: C
CompTIA RF0-001 RF0-001
NO.13 Desktop industrial RFID-enabled bar code printers handle an inoperative tag by:
A. sending an error to the host.
B. printing 'void' or some other marking on the label.
C. ejecting the label.
D. ignoring it and continuing.
Answer: B
CompTIA RF0-001 RF0-001 RF0-001 dumps RF0-001 RF0-001자료
NO.14 Which of the following conditions would be MOST likely to cause a ghost tag read?
A. The interrogator did not pass electronic product code (EPC) compliance testing.
B. There is a broken strap between the chip and the antenna on the tag.
C. There are too many tags within an interrogator zone.
D. There is RF interference in an interrogator zone.
Answer: D
CompTIA RF0-001 RF0-001최신덤프
NO.15 Which of the following RFID tags would be BEST for inconspicuous tagging of assets containing a
maximum of eight bytes of data and are inductively coupled?
A. Active 433.92 MHz tag with strategically installed fixed interrogators.
B. Passive 13.56 MHz tag that is affixed to the asset and camouflaged requiring continuous loop
interrogation.
C. Passive Gen 2 tag requiring line of sight backscatter interrogation.
D. Active 433.92 MHz tag requiring modulated backscatter interrogation.
Answer: B
CompTIA자료 RF0-001 dumps RF0-001시험문제 RF0-001덤프
NO.16 When firmware upgrades become available, which of the following should the technician consider
FIRST?
A. How to install the upgrade.
B. When to schedule the upgrade.
C. Whether the upgrade can be downloaded from the internet.
D. The benefits of new upgrade.
Answer: D
CompTIA자격증 RF0-001기출문제 RF0-001 dumps RF0-001 RF0-001
NO.17 While troubleshooting an interrogation zone, a technician discovers that the antenna wires have torn
free of their connectors. Which of the following would be the FIRST step for the technician to take?
A. Secure the cables so they cannot tear free again.
B. Crimp a new end on the cable.
C. Power down the interrogator.
D. Attach the repaired cable to the antenna.
Answer: C
CompTIA dump RF0-001인증 RF0-001자료 RF0-001
NO.18 Which of the following technologies would provide the BEST read range when attached to a
corrugated metal freight container that is 40 feet (12.4 meters)?
A. Passive 13.56 MHz from a one watt interrogator/antenna
B. Passive 860 - 960 MHz from a 4 watt interrogator/antenna C. Active 433.92 MHz, operating at 10 mW
D. Active 2450 MHz, operating at 10 mW
Answer: C
CompTIA RF0-001기출문제 RF0-001 pdf RF0-001 RF0-001
NO.19 Cases are going to be tagged and stored in a humid, high temperature area. Which of the following
types of labels would be needed?
A. Poly-coated with gum adhesive.
B. Direct thermal with gum adhesive.
C. Poly-coated with water base adhesive.
D. Paper with gum adhesive.
Answer: A
CompTIA RF0-001 RF0-001인증 RF0-001인증
NO.20 Ideally, as a tag passes though the antenna read window it should be:
A. inside metal foil.
B. on the same plane as the antenna.
C. at least 30 feet (9.3 meters) from the antenna.
D. facing away from antenna.
Answer: B
CompTIA RF0-001 RF0-001시험문제 RF0-001
ITexamdump의 78-702덤프의 VCE테스트프로그램과 EX0-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-486시험에 대비한 고품질 덤프와 000-656시험 최신버전덤프를 제공해드립니다. 최고품질 70-688시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기